*bump*
Sunday, January 7, 2007
I finished up some various things this evening, rewired a new switch for the CSA mod into the battery compartment, then completed the tedious process of reassembling the calculator. I managed to get keys from a spare calculator that were actually smaller than the keys from the one I was using, those they do stick or jam on the now slightly-narrowed key aperture walls. Pix below.
Monday, January 8, 2007
This morning I tested the PS/2 port to ensure it was still functioning properly; both keyboards and mice seemed to work fine. I found an old IBM mini PS/2 mouse lying around, sanded it down, and gave it two coats of my dark red glossy paint. Next, I masked off the first of the two silver stripes and painted it. The second stripe shall be added tomorrow. Pix:
The second silver stripe on the slide case:
The masked-off minimouse:
Three views of the completed front, although key labels are still absent:
For the key lables, I'm considering getting a red and a silver pen and writing in silver on red areas and red on silver areas. I'm also strongly considering varnishing the whole shebang - any suggestions on varnish?