Rom Problems?

kalan_vod · Post by **kalan_vod** » Mon 12 Dec, 2005 10:53 pm

Rom8x has been updated and I actually got a rom off my calculator!

So maybe it was a fix or maybe I did it right this time

. Good luck!

Liazon · Post by **Liazon** » Mon 12 Dec, 2005 10:59 pm

So using this program, you don't actually have to connect your calc to the comp to get a ROM dump? I could use a silver USB cable, send the programs to the calc, run them, and then send them back via USB cable, and then finally follow the rest of the instructions to extract my ROM dump?

kalan_vod · Post by **kalan_vod** » Mon 12 Dec, 2005 11:27 pm

calcul831415 wrote:I could use a silver USB cable, send the programs to the calc, run them, and then send them back via USB cable, and then finally follow the rest of the instructions to extract my ROM dump?

Yes.

CompWiz · Post by **CompWiz** » Tue 13 Dec, 2005 1:55 am

FINALLY GOT MY ROM!

PindurTI can use an 84+SE ROM, right?

kalan_vod · Post by **kalan_vod** » Tue 13 Dec, 2005 2:05 am

removed by kalan_vod

Liazon · Post by **Liazon** » Tue 13 Dec, 2005 2:11 am

Which emulators allow you to take screen shots? And how might I ask?

@CompWiz: Yay! Now you can learn ASM.

CompWiz · Post by **CompWiz** » Tue 13 Dec, 2005 2:24 am

calcul831415 wrote:Which emulators allow you to take screen shots? And how might I ask?

@CompWhiz: Yay! Now you can learn ASM.

PindurTI makes good screen shots. I havn't used it yet, so I'm not sure how.

Yes, ASM here I come.

you know, it's CompWiz, not CompWhiz.

kalan_vod · Post by **kalan_vod** » Tue 13 Dec, 2005 2:40 am

Well you just have to press tab with pindurti, but you can use VTI with calc capture.

CompWiz · Post by **CompWiz** » Tue 13 Dec, 2005 3:01 am

pindurti is better.

Haven't you read through the entire PindurTI forum? So many advantages.

kalan_vod · Post by **kalan_vod** » Tue 13 Dec, 2005 3:02 am

CompWiz wrote:pindurti is better. Haven't you read through the entire PindurTI forum? So many advantages.

I know it is, but I just wanted to list a few other alternatives.

Liazon · Post by **Liazon** » Tue 13 Dec, 2005 3:05 am

CompWiz wrote: you know, it's CompWiz, not CompWhiz.

Sorry, an accidental error. I'll fix it.

Yay! no more slow annoying Ti-83+ Flash Debugger that's not even a close representation of program speed.

threefingeredguy · Post by **threefingeredguy** » Tue 13 Dec, 2005 4:14 pm

I reccommend this for Pindur, if you want a clear screenshot, change the LCD momentum to 100% for both up and down, then the screen shots are clear, if not accurate.

kalan_vod · Post by **kalan_vod** » Tue 13 Dec, 2005 5:29 pm

threefingeredguy wrote:I reccommend this for Pindur, if you want a clear screenshot, change the LCD momentum to 100% for both up and down, then the screen shots are clear, if not accurate.

How can you do that? sorry if it's in the readme.

Post by **benryves** » Tue 13 Dec, 2005 5:37 pm

kalan_vod wrote:
threefingeredguy wrote:I reccommend this for Pindur, if you want a clear screenshot, change the LCD momentum to 100% for both up and down, then the screen shots are clear, if not accurate.
How can you do that? sorry if it's in the readme.

Press F10. Lo and behold, the debugger

kalan_vod · Post by **kalan_vod** » Wed 14 Dec, 2005 4:33 am

benryves wrote:
kalan_vod wrote:
threefingeredguy wrote:I reccommend this for Pindur, if you want a clear screenshot, change the LCD momentum to 100% for both up and down, then the screen shots are clear, if not accurate.
How can you do that? sorry if it's in the readme.
Press F10. Lo and behold, the debugger

Woot! thanks it worked

.