[Featured][Dev] PindurTI (Best Thread 2005)
Moderator: MaxCoderz Staff
- L4E_WakaMol-King
- Maxcoderz Staff
- Posts: 342
- Joined: Tue 01 Nov, 2005 6:34 am
Ok, I think I'm getting closer...
I'm getting "Unknown File Type" errors.
I'm getting "Unknown File Type" errors.
Code: Select all
@echo Assembling Loom...
C:\ASMdev\Assembler loom.z80
C:\ASMdev\wabbit loom.bin loom.8xp
@echo Assembling Data Files...
C:\ASMdev\Assembler zlomdata.z80
C:\ASMdev\wabbit zlomdata.bin zlomdata.8xp
C:\ASMdev\Assembler zlomdat2.z80
C:\ASMdev\wabbit zlomdat2.bin zlomdat2.8xp
@echo Sending Files to PindurTI...
C:\ASMdev\RunFile.exe C:\ASMdev\pindurti.exe
Rem wait a few seconds...
PING 192.168.1.255 -n 2 -w 1000 >NUL
C:\ASMdev\send.exe C:\ASMdev\send loom.8xp zlomdata.8xp zlomdat2.8xp
- Now Under Development - [Progress]
- Jim e
- Calc King
- Posts: 2457
- Joined: Sun 26 Dec, 2004 5:27 am
- Location: SXIOPO = Infinite lives for both players
- Contact:
He said the slot number comes first and you type the last line wrong.
Didn't know that start was internal.
Code: Select all
C:\ASMdev\send.exe 0 loom.8xp zlomdata.8xp zlomdat2.8xp
Didn't know that start was internal.
- L4E_WakaMol-King
- Maxcoderz Staff
- Posts: 342
- Joined: Tue 01 Nov, 2005 6:34 am
I tried that before I posted buy no luck . The error told me it couldn't find program 0, so I assumed I should take it out, but no luck there either.Jim e wrote:He said the slot number comes first and you type the last line wrong.
Code: Select all
C:\ASMdev\send.exe 0 loom.8xp zlomdata.8xp zlomdat2.8xp
Didn't know that start was internal.
- Now Under Development - [Progress]
- L4E_WakaMol-King
- Maxcoderz Staff
- Posts: 342
- Joined: Tue 01 Nov, 2005 6:34 am
PindurTI? I just re-downloaded it 2 days ago.
Here's the text I'm getting:
PindurTI Error: The file doesn't match the running model.
Here's the text I'm getting:
Code: Select all
Assembling Loom...
E:\Z80>C:\ASMdev\Assembler loom.z80
Spencer's Assembler, June 2006
Pass 1 ...
ti83plus.inc line 712: Label name OP3 has already been used.
ti83plus.inc line 795: Label name SAVESSCREEN has already been used.
ti83plus.inc line 798: Label name STATVARS has already been used.
ti83plus.inc line 973: Label name SYMTABLE has already been used.
Done.
Pass 2 ...
Done.
E:\Z80>C:\ASMdev\wabbit loom.bin loom.8xp
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Wabbitsign - TI-83+ Series Freeware APP Signer ³
³ March 2006, Third Release ³
³ Spencer Putt and James Montelongo ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
loom.8xp (6313 bytes) was successfully generated!
Assembling Data Files...
E:\Z80>C:\ASMdev\Assembler zlomdata.z80
Spencer's Assembler, June 2006
Pass 1 ...
Done.
Pass 2 ...
Done.
E:\Z80>C:\ASMdev\wabbit zlomdata.bin zlomdata.8xp
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Wabbitsign - TI-83+ Series Freeware APP Signer ³
³ March 2006, Third Release ³
³ Spencer Putt and James Montelongo ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
zlomdata.8xp (3876 bytes) was successfully generated!
E:\Z80>C:\ASMdev\Assembler zlomdat2.z80
Spencer's Assembler, June 2006
Pass 1 ...
Done.
Pass 2 ...
Done.
E:\Z80>C:\ASMdev\wabbit zlomdat2.bin zlomdat2.8xp
ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ Wabbitsign - TI-83+ Series Freeware APP Signer ³
³ March 2006, Third Release ³
³ Spencer Putt and James Montelongo ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
zlomdat2.8xp (9173 bytes) was successfully generated!
Sending Files to PindurTI...
E:\Z80>C:\ASMdev\RunFile.exe C:\ASMdev\pindurti.exe
E:\Z80>Rem wait a few seconds...
E:\Z80>PING 192.168.1.255 -n 2 -w 1000 1>NUL
E:\Z80>C:\ASMdev\send.exe 0 loom.8xp zlomdata.8xp zlomdat2.8xp
Sending loom.8xp... FAILED
Tool completed with exit code 1
- Now Under Development - [Progress]
-
- MCF Legend
- Posts: 1601
- Joined: Mon 20 Dec, 2004 8:45 am
- Location: Budapest, Absurdistan
- Contact:
Are you sure you also have the latest send.exe? Remember, it's a separate download. Also, it's advisable to send the ROM image you want to use as the first file after the slot number, and it should be on the home screen (i.e. have a corresponding .pti file in that state, possibly also from a backup).
- L4E_WakaMol-King
- Maxcoderz Staff
- Posts: 342
- Joined: Tue 01 Nov, 2005 6:34 am
I just downloaded Pindur and Send 3 days ago... so I'm pretty sure they are current.
I'll try sending the ROM image first.
Nope... still getting "Unknown file type."
I'll try sending the ROM image first.
Code: Select all
E:\Z80>C:\ASMdev\send.exe 0 ti83p.rom.pti loom.8xp zlomdata.8xp zlomdat2.8xp
Sending ti83p.rom.pti... FAILED
Tool completed with exit code 1
- Now Under Development - [Progress]
- L4E_WakaMol-King
- Maxcoderz Staff
- Posts: 342
- Joined: Tue 01 Nov, 2005 6:34 am
It's a ti83p rom and 8xp files... those should match right?Jim e wrote:hmmmm...Does it match the running model?
- Now Under Development - [Progress]
- L4E_WakaMol-King
- Maxcoderz Staff
- Posts: 342
- Joined: Tue 01 Nov, 2005 6:34 am
I tried just taking the .pti off the end of the file... no luck there.CoBB wrote:Don't send a .pti file. Always send the corresponding ROM image (if it is the one currently running, it will be silently ignored, so no harm will be done).
Then I tried sending the original rom image... still no luck, but this time I got a "Transmission Error" instead of an "Unknown File Type" error.
The ROM image I have has a bunch of stuff on it that I don't want... like extra programs already installed and such. That's why I wanted to send the pti file is possible, because I have got that to the point where the calc is empty and at the home screen. Is there a way to change my rom image so that it matches that?
- Now Under Development - [Progress]
-
- MCF Legend
- Posts: 1601
- Joined: Mon 20 Dec, 2004 8:45 am
- Location: Budapest, Absurdistan
- Contact:
The ROM image can only hold flash applications. When you send a ROM image to PTI for the first time, you should just turn on the new calculator and exit the program. You'll see a file named <romfile>.pti, which holds the RAM, LCD state, CPU state etc. Now, the ROM and the .pti file together represent a clean calculator state (not counting the apps in the ROM). Back them up somewhere, and have your batch file do the following:
1. Copy the backups to the directory where the ROM image allocated to the first slot (that you can see in pti.conf) resides. You can restore pti.conf from a backup or write one yourself. I recommend copying the ROMs you want to execute to the directory of pindurti.exe and keeping backups elsewhere.
2. Start up PTI.
3. Invoke send. You need to send the ROM image only if it isn't specified in pti.conf to run in the slot you're sending the files to.
4. Test your stuff.
5. Close PTI.
There's a shorter alternative route: keep running PTI all the time and invoke only the sender when you're on the home screen (switch on the calculator first if it APD'd), preferably still sending the ROM image first.
1. Copy the backups to the directory where the ROM image allocated to the first slot (that you can see in pti.conf) resides. You can restore pti.conf from a backup or write one yourself. I recommend copying the ROMs you want to execute to the directory of pindurti.exe and keeping backups elsewhere.
2. Start up PTI.
3. Invoke send. You need to send the ROM image only if it isn't specified in pti.conf to run in the slot you're sending the files to.
4. Test your stuff.
5. Close PTI.
There's a shorter alternative route: keep running PTI all the time and invoke only the sender when you're on the home screen (switch on the calculator first if it APD'd), preferably still sending the ROM image first.